Expanded part of the inside and outside the region, and then reduced by the stamping or rolling operation to form the back and a large number of frustoconical sealing surface, respectively. Structure and characteristics: DKJ sleeve type metal hose fittings, can no thread to connect the pipes and hoses, save threading process, simply screw into the can; metal joints made of zinc alloy die-casting, surface galvanized, frosted, or chrome; structure, the strength is high. ; flow control valve: the throttle valve, control valve, diversion valve; auxiliary components: accumulators, filters, coolers, heaters, tubing, fittings, tanks, pressure gauge.

And metal hose fittings connected and reliable, looks beautiful; this metal connector for the termination type, used to connect metal hose fittings box on the line; fit metal hose fittings: JS-type, JSH type, JSB type, JSHG type; recommended Inch metal hose fittings metal connector or metric thread; can customize all kinds of non metal hose fittings , special metal connector. To reduce noise, the noise source must be the actual investigation, measurement of sound pressure level of hydraulic fittings system, a frequency analysis of noise sources to learn from the size and frequency characteristics, to take corresponding measures, specifically listed as follows.

Low-noise motor; and use the flexible China Filter funnel Manufacturers coupling, in order to reduce the vibration and noise caused by links; in motor, hydraulic pump and hydraulic valve installation surface should be set up anti-vibration pad; try to replace the pipe with a hydraulic fittings manifold block to reduce vibration; with accumulator and rubber hose to reduce vibration caused by the pressure pulse, the accumulator can absorb the noise below 10 Hz, while the high-frequency noise, with a hydraulic fittings hose is very effective; use with sound-absorbing materials acoustic enclosures, hydraulic fittings hood can be effectively reduced noise; system should be set up air devices.

Steel and metal hose connection reliability, aesthetic appearance; the metal connector for the card sets, metal hose used to connect the pipes without threads above; fit metal hose fit steel: thin steel wire tube, black and galvanized iron pipes (water, gas pipelines); use metal connectors DKJ card sets, please note that the specifications of hose pipe connection, size. A method of producing hydraulic fittings, including the expansion of a part of the pipe end to form a part of the expansion. Measures to reduce the hydraulic system noise. Introduce some knowledge of hose fittings. First, DPJ external thread termination metal hose fittings. Connection part, punching or rolling to form the pipe end.Hydraulic fittings parts manufacturing method includes: the expansion of the one part of the approximation to an end; substantially reduced to 1 frustoconical rear part of the expansion in the region; andreducing an expanded part of the outer region into a substantially frustoconical sealing surface.

Posted by: sealingclip at 02:53 AM | No Comments | Add Comment
Post contains 468 words, total size 3 kb.